| Zetor
Forterra 2008
Four models from 99hp – 128hp are great all-round performers with the power, strength and versatility to handle the toughest jobs cost effectively.
Engine
Forterra is powered by a new generation of 4 cylinder, turbocharged & inter-cooled engines that use the latest technology to deliver exceptional power with torque backup of up to 37% and outstanding fuel economy. Balancing shafts are fitted for smooth, vibration free running. While design features like oil cooler and oil cooled pistons with oversize wet liners and in-line fuel injection pumps offer increased reliability.
Transmission
A smooth shifting 24 x 18 three speed mechanical powershift transmission with forward synchro-shuttle & three speed powershifts is controlled by stick mounted buttons. All models have Luk cerametallic clutch plates for enhanced performance & reliability.
Powerful Bosch electronic hydraulics with 5.8 Tonne lift capacity are standard on all models; as are lower link sensing, Cat II linkage with Walterscheid couplings, three double acting spool valves and hydraulic trailer braking.
Heavy duty Carraro front axle with 55º steering angle and increased load capacity make Forterra ideal for the most demanding loader work. 4 wheel braking with oil immersed rear brakes & shaft-braked front axle. Both are virtually maintenance free and provide positive, dependable response.
Cab
Comfort cab with pillar-mounted exhaust offers outstanding all-round visibility. Operator comfort is a priority with Gramme Maximo seat, adjustable steering column, ergonomically designed controls, digital dash board & radio-CD
External
Forterra is well equipped all-round with:
Reversible draw bar / pick-up hitch;
Power isolator switch for safety & Air compressor for convenience & to support some tractor operations.
Front mudguards, Rear wiper, Beacon & Full work lights.
Technical
Parameters
| MODEL |
Z 9641 |
Z 10641 |
Z 11441 |
Z 12441 |
| ENGINE |
|
| Model |
Zetor 1005 |
Zetor 1305 |
Zetor 1405 |
Zetor 1505 |
| Power (kW/HP) ECE R24 |
66/90 |
74/101 |
81/110 |
90/120 |
| Rated speed (rpm) |
2200 |
| No. of cylinders |
4 |
| Aspiration |
turbocharged |
| Bore/Stroke (mm) |
105/120 |
| Displacement (cc) |
4156 |
| Torque reserve (%) |
37 |
37 |
37 |
35 |
| Emissions |
TIER III |
| CLUTCH |
|
| Type |
dry, single plate, hydraulic control
|
| Diameter (mm) |
325 |
| Lining |
cerametallic |
| TRANSMISSION |
|
| Type |
mechanical, hydraulically controlled
three-speed power shift |
| Shifting |
fully synchronised |
| Gears forward/reverse |
24/18 |
| Speed (kmph) |
40 |
| PTO SHAFT |
|
| Type |
independent, ground speed standard,
multi-plate PTO clutch |
| Speeds (rpm) |
540/1000 |
| Front PTO |
1000 rpm, optionally |
| HYDRAULICS |
|
| Type |
electrohydraulic ZMS 23 LS |
| Three point hitch |
category II |
| Control |
electronic continuous control |
| Lift capacity (kN) |
58.5 |
| Operating pressure (MPa) |
18 |
| Pump capacity (l/min) |
70 standard, 60 optional |
| SCV's |
3 sets standard (6 + 1 remote outlets),
2 sets optional |
| OTHER |
|
| Drive system |
4WD |
| Operator's station |
cab versions only |
| Steering |
hydrostatic |
| Service brake |
wet disc brake, hydraulic control
|
| Parking brake |
mechanical control |
| Front axle 4WD |
55º turning angle, limited slip
front differential, braked, fenders |
| Rear axle |
epicyclic final reduction, differential
lock engaged electro-pneumatically |
| DIMENSIONS |
|
| Max. length (mm) |
4670 |
| Max. width (mm) |
2240 |
| Max. height (mm) |
2768 |
| Wheel base (mm) |
2390 |
| Clearance (mm) |
417 |
| Standard front tyres |
12.4-28 |
14.9R24 |
| Standard rear tyres |
16.9-38 |
16.9R38 |
| Weight (kg) |
4660 |
| OPTIONAL |
|
| |
adjustable steering wheel; A/C; rear
PTO 750/1000 rpm; |
|
mate’s seat; adjustable trailer
hitch; |
| |
pick-up hitch; front three point hitch;
|
| |
front and rear weights; block heater;
choice of tyre combinations; |
| |
hydraulic or air pressure trailer
brakes; CBM lower link ends; |
| |
digital display dashboard; heated
external mirrors and rear window |
back
| |


|